Insights  /  Efficiency

Efficiency

What PUE really tells you about a data centre

A plain-language guide to the most quoted number in data centres: what it measures, what it leaves out, and what to ask an operator.

InduS.AI Ventures team23 Nov 2026·3 min read
In shortPUE, power usage effectiveness, compares the total power a facility uses with the power that reaches the computing equipment. The closer it is to 1.0, the less energy is lost to overhead.

What PUE measures

PUE is a simple ratio: total facility power divided by IT equipment power. Total facility power covers everything the building uses, including cooling, power conversion and lighting, on top of the servers, storage and networking themselves.

A PUE of 1.5 means that for every 1 unit of power reaching the computing, another 0.5 goes to keeping the building running.

Example: a facility with a PUE of 1.5
IT equipment
1.0
Overhead
0.5

Illustrative figures. Overhead is cooling, power conversion, lighting and other building loads.

Why a lower number matters

Overhead is energy that does no computing. At the scale of a hyperscale campus, even a small improvement in PUE adds up to a large amount of energy saved over a year. That also means less power to source, store and back up.

What it leaves out

PUE is useful, but it is only one number. It does not tell you:

  • Where the power comes from. A low PUE on a carbon-heavy grid is still a high-carbon facility.
  • How much water is used. Some cooling choices cut power use but raise water use, and PUE does not show it.
  • Whether the computing is useful. PUE counts power reaching IT equipment, not what that equipment achieves.

Questions to ask an operator

  1. Is the figure an annual average or a best-case reading?
  2. Does it cover the whole campus or a single hall?
  3. What share of the power is renewable?
  4. How much water does cooling use?

At InduS.AI Ventures we treat PUE as one measure alongside clean power share and water use, because a data centre is only as green as the full picture.